WHAT ARE ELECTROMAGNETIC FIELDS (EMF)
- The electromagnetic spectrum encompasses both natural and human-made sources of electromagnetic fields.
- Frequency and wavelength characterise an electromagnetic field. In an electromagnetic wave, these two characteristics are directly related to each other: the higher the frequency the shorter the wavelength.
- At radio and microwave frequencies, electric and magnetic fields are considered together as the two components of an electromagnetic wave. Power density, measured in watts per square metre (W/m2), describes the intensity of these fields.
- Low frequency and high frequency electromagnetic waves affect the human body in different ways.
- Electric fields exist whenever charge is present and are measured in volts per metre (V/m). Magnetic fields arise from current flow. Their flux densities are measured in microtesla (µT) or millitesla (mT).
- Electrical power supplies and appliances are the most common sources of low frequency electric and magnetic fields in our living environment. Everyday sources of radiofrequency electromagnetic fields are telecommunications, broadcasting antennas and microwave ovens.
- Ionizing radiation such as X-ray and gamma-rays consists of photons which carry sufficient energy to break molecular bonds. Photons of electromagnetic waves at power and radio frequencies have much lower energy that do not have this ability.
- Electric fields arise from voltage.
- Their strength is measured in Volts per metre (V/m)
- An electric field can be present even when a device is switched off.
- Field strength decreases with distance from the source.
- Most building materials shield electric fields to some extent.
- Magnetic fields arise from current flows.
- Their strength is measured in amperes per meter (A/m). Commonly, EMF investigators use a related measure, flux density (in microtesla (µT) or millitesla (mT) instead.
- Magnetic fields exist as soon as a device is switched on and current flows.
- Field strength decreases with distance from the source.
- Magnetic fields are not attenuated by most materials.
DEFINITIONS AND SOURCES
Electric fields are created by differences in voltage: the higher the voltage, the stronger will be the resultant field. Magnetic fields are created when electric current flows: the greater the current, the stronger the magnetic field. An electric field will exist even when there is no current flowing. If current does flow, the strength of the magnetic field will vary with power consumption but the electric field strength will be constant.
(Extract from Electromagnetic fields published by the WHO Regional Office for Europe in 1999 (Local authorities, health and environment briefing pamphlet series; 32).
Natural sources of electromagnetic fields
Electromagnetic fields are present everywhere in our environment but are invisible to the human eye. Electric fields are produced by the local build-up of electric charges in the atmosphere associated with thunderstorms. The earth’s magnetic field causes a compass needle to orient in a North-South direction and is used by birds and fish for navigation.
Human-made sources of electromagnetic fields
Besides natural sources the electromagnetic spectrum also includes fields generated by human-made sources: X-rays are employed to diagnose a broken limb after a sport accident. The electricity that comes out of every power socket has associated low frequency electromagnetic fields. And various kinds of higher frequency radiowaves are used to transmit information – whether via TV antennas, radio stations or mobile phone base stations.
THE BASICS OF WAVELENGTH AND FREQUENCY
What makes the various forms of electromagnetic fields so different?
One of the main characteristics which defines an electromagnetic field (EMF) is its frequency or its corresponding wavelength. Fields of different frequencies interact with the body in different ways. One can imagine electromagnetic waves as series of very regular waves that travel at an enormous speed, the speed of light. The frequency simply describes the number of oscillations or cycles per second, while the term wavelength describes the distance between one wave and the next. Hence wavelength and frequency are inseparably intertwined: the higher the frequency the shorter the wavelength.
A simple analogy should help to illustrate the concept: Tie a long rope to a door handle and keep hold of the free end. Moving it up and then down slowly will generate a single big wave; more rapid motion will generate a whole series of small waves. The length of the rope remains constant, therefore, the more waves you generate (higher frequency) the smaller will be the distance between them (shorter wavelength).
What is the difference between non-ionizing electromagnetic fields and ionising radiation?
Wavelength and frequency determine another important characteristic of electromagnetic fields: Electromagnetic waves are carried by particles called quanta. Quanta of higher frequency (shorter wavelength) waves carry more energy than lower frequency (longer wavelength) fields. Some electromagnetic waves carry so much energy per quantum that they have the ability to break bonds between molecules. In the electromagnetic spectrum, gamma rays given off by radioactive materials, cosmic rays and X-rays carry this property and are called ‘ionizing radiation’. Fields whose quanta are insufficient to break molecular bonds are called ‘non-ionizing radiation’. Man-made sources of electromagnetic fields that form a major part of industrialized life – electricity, microwaves and radiofrequency fields – are found at the relatively long wavelength and low frequency end of the electromagnetic spectrum and their quanta are unable to break chemical bonds.
Electromagnetic fields at low frequencies
Electric fields exist whenever a positive or negative electrical charge is present. They exert forces on other charges within the field. The strength of the electric field is measured in volts per metre (V/m). Any electrical wire that is charged will produce an associated electric field. This field exists even when there is no current flowing. The higher the voltage, the stronger the electric field at a given distance from the wire.
Electric fields are strongest close to a charge or charged conductor, and their strength rapidly diminishes with distance from it. Conductors such as metal shield them very effectively. Other materials, such as building materials and trees, provide some shielding capability. Therefore, the electric fields from power lines outside the house are reduced by walls, buildings, and trees. When power lines are buried in the ground, the electric fields at the surface are hardly detectable.
Magnetic fields arise from the motion of electric charges. The strength of the magnetic field is measured in amperes per meter (A/m); more commonly in electromagnetic field research, scientists specify a related quantity, the flux density (in microtesla, µT) instead. In contrast to electric fields, a magnetic field is only produced once a device is switched on and current flows. The higher the current, the greater the strength of the magnetic field.
Like electric fields, magnetic fields are strongest close to their origin and rapidly decrease at greater distances from the source. Magnetic fields are not blocked by common materials such as the walls of buildings.
Plugging a wire into an outlet creates electric fields in the air surrounding the appliance. The higher the voltage the stronger the field produced. Since the voltage can exist even when no current is flowing, the appliance does not have to be turned on for an electric field to exist in the room surrounding it.
Magnetic fields are created only when the electric current flows. Magnetic fields and electric fields then exist together in the room environment. The greater the current the stronger the magnetic field. High voltages are used for the transmission and distribution of electricity whereas relatively low voltages are used in the home. The voltages used by power transmission equipment vary little from day to day, currents through a transmission line vary with power consumption.
Electric fields around the wire to an appliance only cease to exist when the appliance is unplugged or switched off at the wall. They will still exist around the cable behind the wall.
How do static fields differ from time-varying fields?
A static field does not vary over time. A direct current (DC) is an electric current flowing in one direction only. In any battery-powered appliance the current flows from the battery to the appliance and then back to the battery. It will create a static magnetic field. The earth’s magnetic field is also a static field. So is the magnetic field around a bar magnet which can be visualized by observing the pattern that is formed when iron filings are sprinkled around it.
In contrast, time-varying electromagnetic fields are produced by alternating currents (AC). Alternating currents reverse their direction at regular intervals. In most European countries electricity changes direction with a frequency of 50 cycles per second or 50 Hertz. Equally, the associated electromagnetic field changes its orientation 50 times every second. North American electricity has a frequency of 60 Hertz.
What are the main sources of low, intermediate and high frequency fields?
The time-varying electromagnetic fields produced by electrical appliances are an example of extremely low frequency (ELF) fields. ELF fields generally have frequencies up to 300 Hz. Other technologies produce intermediate frequency (IF) fields with frequencies from 300 Hz to 10 MHz and radiofrequency (RF) fields with frequencies of 10 MHz to 300 GHz. The effects of electromagnetic fields on the human body depend not only on their field level but on their frequency and energy. Our electricity power supply and all appliances using electricity are the main sources of ELF fields; computer screens, anti-theft devices and security systems are the main sources of IF fields; and radio, television, radar and cellular telephone antennas, and microwave ovens are the main sources of RF fields. These fields induce currents within the human body, which if sufficient can produce a range of effects such as heating and electrical shock, depending on their amplitude and frequency range. (However, to produce such effects, the fields outside the body would have to be very strong, far stronger than present in normal environments.)
Electromagnetic fields at high frequencies
Mobile telephones, television and radio transmitters and radar produce RF fields. These fields are used to transmit information over long distances and form the basis of telecommunications as well as radio and television broadcasting all over the world. Microwaves are RF fields at high frequencies in the GHz range. In microwaves ovens, we use them to quickly heat food.
At radio frequencies, electric and magnetic fields are closely interrelated and we typically measure their levels as power densities in watts per square metre (W/m2)